Page Comparison

...

...

• If you are prompted to choose a type of EAP (before Phase 2 Authentication), choose PEAP

• Phase 2 Authentication - choose MSCHAPV2
  

• CA Certificate - choose Do Not validate
  

• Online Certificate Status - choose Do not verify  (or system certificates or Unspecified

• Domain - enter swarthmore.edu (if domain is requested)

• Identity - enter your Swarthmore email address

• Password - enter your Swarthmore password

...

1. Under Advanced at the bottom of the eduroam wireless configuration options, configure:
   • Make sure EAP is set to PEAP
   • Phase 2 Authentication - choose MSCHAPV2
2. Click Save
3. On the main configuration screen, configure:
   • Certificates - confirm Do not validate is checked
   • Identity - enter your FULL Swarthmore email address
   • Password - enter your Swarthmore password

Android: Google Pixel 6 and 7 with Android 13

1. On your Android device, swipe down twice to find the settings option.   
2. Tap Settings, then Network & internet, then Internet.   
3. Tap eduroam.  
4. Tap EAP method, then select PEAP.    
5. Tap Phase 2 authentication, then select MSCHAPV2.    
6. Tap CA certificate, then select Use system certificates.    
7. Tap Online Certificate Status, then select Do not verify.    
8. Tap the line under Domain and enter swarthmore.edu.
              Image Added
9. Tap the line under Identity and enter your Usernam@swarthmore.edu address.    
10. Tap the line under Password and enter your Swarthmore password.    
11. Tap Connect at the bottom of the screen

Anchor
ChromeOS ChromeOS

ChromeOS Device Configuration

...