...
After installing the required software, it may take up to three minutes for your network connection to reconfigure. When it does, you should be online! If it does not automatically redirect you to the Swarthmore home page, open up a new tab or window, and try to go to your off-campus webpage again (e.g. cnn.com or facebook.com, etc.).
| Anchor | ||||
|---|---|---|---|---|
|
Android devices need to be manually configured, and require an extra step (Phase 2 Authentication). Follow the instructions below - only fill in the following fields, and leave everything else set to the defaults (no need to change them):
...
Click Connect, and follow the instructions above for device registration. If prompted to install a certificate, allow installation.
| Anchor | ||||
|---|---|---|---|---|
|
Some devices, such as gaming systems and eReaders, do not support WPA2-Enterprise authentication. These devices will need to be registered for SwatDevice. Only devices NOT capable of WPA2-Enterprise will be allowed on SwatDevice. To register a device for SwatDevice, you will need the device's MAC address. Instructions for finding the MAC address of many common devices can be found on the ITS Gaming and Other Devices webpage.
...