If your networked printer has stopped working or has an error, try power cycling it to clear the residual memory.

First, check if the printer's ethernet cable is plugged into the wall jack, and securely plugged in at both ends. After that, power cycle the printer by following the directions below:

Delete all jobs stuck in the print queue (the queue should be empty)
Turn printer off
Unplug the power cord from the electrical outlet
Wait 30-45 seconds
Plug the power cord back into the electrical outlet
Turn printer on
Wait while it finishes booting up
Try printing again

If that doesn't fix the issue, or you're not able to clear the print queue, contact the Help Desk.

Browser not supported